Name: Benchmade 810 Osborne Contego plain edge
Brand: Benchmade
SKU: BE810
Availability: BackOrder
Rating: 10 (1 reviews)

Benchmade Dacian 203 Stonewashed CPM MagnaCut, Blue Denim Micarta fixed knife

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Spyderco Paramilitary 2 Salt, CPM MagnaCut Black DLC, Black G10 C81GMCBKP2 pocket knife

Benchmade Bugout 535-12 Stonewashed CPM S30V, Tan Grivory, pocket knife

Buck CSAR-T 095 Buck/TOPS 0095BKSTP-B pocket knife

Benchmade 940 Osborne

Benchmade Bailout Aluminium 537GY-1 pocket knife

Benchmade Presidio II 570-1 CF-Elite pocket knife

Benchmade Redoubt 430BK pocket knife

Cold Steel AK-47 CPM S35VN 58M pocket knife

strike_price

Cold Steel Kudu 20KK pocket knife

Gerber Gator 06069 clip point, fine edge pocket knife

Hultafors OK4 Outdoor Knife 4 380270 carbon, fixed knife

Kershaw Iridium 2038 DuraLock Gray Anodized Aluminium pocket knife

Kershaw Mini Iridium 2051 DuraLock, Stonewashed D2, Ice Blue Aluminum pocket knife

Kizer C01C Sheepdog XL Carbon fibre V5488C3 pocket knife

Knafs Lander 2 KNAFS-00274 Green Micarta, Clutch Lock, pocket knife

Ruike LD51-B Trekker pocket knife, black

Smith & Wesson Wood Handle Folder 1147091 pocket knife

Smith & Wesson Stave 1122569 EDC-pocket knife

Handle/blade: G10/M4
Blade length: 10,2 cm
Weight: 169 grams

The **Benchmade 810 Osborne Contego** is a good tactical folding knife, designed by Warren Osborne. They have chosen for a CPM M4 steel blade. A very sturdy and hard steel, but not stainless due to the high carbon content. You do have to watch out a little to prevent it from rusting.


The handles of this knife are made of very rough G10. This makes for very good grip, but it is a bit rough on the hands. The back of the handle has a glass breaker.




Benchmade 810 Osborne Contego plain edge

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade 810 Osborne Contego plain edge

Benchmade 810 Osborne Contego plain edge

Full description

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 810 Osborne Contego plain edge

Benchmade 810 Osborne Contego plain edge

Benchmade 810 Osborne Contego plain edge

Full description

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 810 Osborne Contego plain edge

Relevant topics