Name: Böker 3000, 1674 Limited Edition 112500 pocket knife
Brand: Böker
SKU: BO112500
Availability: BackOrder

Handle/blade: desert ironwood/440C
Blade length: 8.5 cm
Weight: 170 grams

 The **Böker 3000 1674** is a classic pocket knife. Large, solid and stylish. The blade can be opened with two hands and is locked with a backlock. When opened it falls into place with a careful click. The 440C-steel blade is stainless and polished. 440C-steel is a basic type of steel many current types of steel are based on. The bolsters are made from nickel silver and the handle has Desert Ironwood inlays. 

 ## Desert Ironwood handle

 The handle is made from *Desert Ironwood*. This is a stunning type of wood that can be found in Mexico, Arizona and New Mexico. The grain of the wood is glossy and contains a lot of depth.

 ## Böker 1674 Limited Edition

 These Böker 1674 models are the result of a recent discovery. During the 150th anniversary of Böker Mexico, which was founded in 1865 by Robert Böker, very old documents resurfaced. Up until that moment one assumed that the German branch of the Böker brand was founded in 1869 by Heinrich Böker. The documents, however, demonstrated that the brand had already been registered in 1674 as a private brand. This made the Böker brand 343 years old! In honor of this discovery Böker introduced the special 1674-collection. A couple of classic and recent models, of which only 343 pieces were made.



Böker 3000, 1674 Limited Edition 112500 pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker 3000, 1674 Limited Edition 112500 pocket knife