Name: Böker Plus XS Satin 01BO539 pocket knife, Chad Los Banos design
Brand: Böker
SKU: BO01BO539
Price: 59.9 EUR
Availability: BackOrder
Rating: 8.5 (2 reviews)

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

notforsale

not_replaced_in

Böker Knife Vault Small 09BO153 knife bag

Work Sharp Precision Adjust Elite WS09DX066 sharpening system

Böker Plus CID cal .45 Gray 09BO086 tactical pen

Böker Plus CID cal .45 Black 09BO085 tactical pen

Böker Plus K.I.D. Cal .50, 09BO072 Black, tactical pen

Böker Plus Tool Pen 09BO084, screwdriver

Skerper Maintenance Oil Pen MA002, 10 ml

Boker Plus Tool kit Hex key

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

Skerper Pocket Strop STP002, stropping paddle

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

Nano-Oil 10w maintenance oil 8cc/8ml

Boker Plus Tool kit Torx

Böker Plus Trucker Cap 09BP0009

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools Knife Pouch Black, by Maxpedition

Handle/blade: G10/440C
Blade length: 7.9 cm
Weight: 110 grams

The **Böker Plus XS Satin 01BO539** is a practical pocket knife, enhanced with a slipjoint mechanism. As such the blade won't lock when opened, but it does offer the necessary resistance from closing accidentally. Thanks to this mechanism this knife is legal in many countries where locking knives are illegal (United Kingdom, Germany, for instance). This knife was designed by Chad Los Banos.



You open the Böker Plus XS with one hand with the help of the practical thumb studs. The slipjoint which slightly blocks the blade when opened is enhanced with a hard halfstop. As such you always know that your fingers are safe when you close the knife.




Böker Plus XS Satin 01BO539 pocket knife, Chad Los Banos design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Good solid knife, 
It's not the easiest to open one handed but ok.
It's a little fiddly when clipping in my trouser pocket. The opening stud on the blade catches.
I think a stud which could be moved for right or left hand opening would be better than both fitted.
But I'm being fussy, I don't regret buying it and I don't think anyone else will either.

Thanks for the great service and great product.  

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Plus XS Satin 01BO539 pocket knife, Chad Los Banos design

Böker Plus XS Satin 01BO539 pocket knife, Chad Los Banos design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus XS Satin 01BO539 pocket knife, Chad Los Banos design

Böker Plus XS Satin 01BO539 pocket knife, Chad Los Banos design

Böker Plus XS Satin 01BO539 pocket knife, Chad Los Banos design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus XS Satin 01BO539 pocket knife, Chad Los Banos design

Relevant topics