Name: CRKT Apoc 5380 pocket knife, Eric Ochs design
Brand: CRKT
SKU: CK-5380
Price: 79.95 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

CRKT Williams Defense Pen, Black Aluminum, tactical pen, James Williams design

legal_agecheck_key

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

CRKT tactical pen designed by James Williams, black

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

CRKT Veff Sharp Sharpener VEFF1 diamant 600 grit, sharpening steel set

CRKT BoltLiner Pen TPENBOND3 Gray Aluminum pen, Mike Bond design

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

CRKT Nathan’s Knife Kit 1032 DIT kit wooden pocket knife

productlabel

CRKT Hex Bit Driver, Brass, 9911-2, Scout Tools design

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Handle/blade: G10/8Cr14MoV
Blade length: 10.3 cm 
Weight: 175 grams

The **CRKT Apoc 5380** was designed by Eric Ochs, especially for the end of time. As such CRKT calls the knife *'A knife designed for doomsday'*. You can tell when you look at the rough and slightly sinister design.

 Of course this knife wasn't really designed for the end of the world. The CRKT Apoc is simply an amazing EDC knife with an interesting concept. Really cool for anyone looking for a unique pocket knife. The blade is made from 8Cr13MoV-steel. A great type of steel that is easy to sharpen. Practical for a knife that is meant to be used on a daily basis. As such you know that you will never be left with a blunt knife that cannot be sharpened. The grooves on the blade do not only look cool. When you take a hold of the blade on both sides with your thumb and index finger you have a great grip. The tip is low in relation to the handle and the blade is enhanced with a hollow grind. This combination of factors has made the Apoc perfect for the more detailed tasks.

 You open the Apoc with the flipper after which a framelock locks the blade. Because of the use of IKBS ball bearings the knife moves well. The narrow G10 scales, which are mounted on the black steel liners, ensure that you have enough grip over the knife. The palm of your hand nicely forms around these G10 scales. With the deep-carry pocket clip you can comfortably carry the knife in your pocket.



CRKT Apoc 5380 pocket knife, Eric Ochs design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

when spending at least €75 on CRKT knives (1 per order)

Free Skerper Pocket Stone sharpening stone worth €14.95

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT Apoc 5380 pocket knife, Eric Ochs design

Free Skerper Pocket Stone sharpening stone worth €14.95

CRKT Apoc 5380 pocket knife, Eric Ochs design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Apoc 5380 pocket knife, Eric Ochs design

CRKT Apoc 5380 pocket knife, Eric Ochs design

Free Skerper Pocket Stone sharpening stone worth €14.95

CRKT Apoc 5380 pocket knife, Eric Ochs design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Apoc 5380 pocket knife, Eric Ochs design

Relevant topics