Name: CRKT Directive Tanto 1062 pocket knife, Matthew Lerch design
Brand: CRKT
SKU: CK-1062
Price: 49.4 EUR
Availability: BackOrder

Work Sharp Multi-Sharpener Ken Onion Edition

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

productlabel

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

CRKT Driver And Bit Storage Block 9916 Aluminum, bit driver and bit holder, Joe Wu design

CRKT Williams Defense Pen, Black Aluminum, tactical pen, James Williams design

legal_agecheck_key

CRKT Williams Defense Pen, OD Green, tactical pen James Williams design

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

CRKT Collet Pen TPENWU Aluminium, tactical pen

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Skerper Pocket Strop STP002, stropping paddle

CRKT Nathan’s Knife Kit 1032 DIT kit wooden pocket knife

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Skerper Basic sharpening pen with a diamond steel, SO001

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Handle/blade: FRN/8Cr14MoV
Blade length: 9,0 cm
Weight: 140 grams



The **CRKT Directive** is a functional pocket knife, designed by Matthew Lerch. For this design he became inspired by tactical knives. Fully covered in black and tough lines: something you will immediately notice. And yet this knife is much more versatile than simply great for tactical use. It is a real all-rounder. Due to the large finger groove just before the flipper you can take hold of it in the front. As such you have a lot of control over the blade.




The blade is made from 8Cr14MoV steel. Stainless and easy to sharpen. The nicely curved plunge line is a great detail for a knife in this range. You open the Directive with the flipper. The blade will shoot from the handle and will move smoothly thanks to the ball bearings. When opened a liner lock makes sure the blade stays in place. The handle is made from FRN: glass-reinforced nylon. Light-weight and rock-solid. You can wear the pocket clip in four different ways. As such it is truly a friend to all.




CRKT Directive Tanto 1062 pocket knife, Matthew Lerch design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT Directive Tanto 1062 pocket knife, Matthew Lerch design

CRKT Directive Tanto 1062 pocket knife, Matthew Lerch design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Directive Tanto 1062 pocket knife, Matthew Lerch design

CRKT Directive Tanto 1062 pocket knife, Matthew Lerch design

CRKT Directive Tanto 1062 pocket knife, Matthew Lerch design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Directive Tanto 1062 pocket knife, Matthew Lerch design

Relevant topics