Name: GiantMouse ACE Nimbus Green G10 pocket knife, Ansø en Voxnaes design
Brand: GiantMouse
SKU: GMNIMBUS02
Availability: BackOrder

Handle/blade: G10/M390
Blade length: 7.7 cm
Weight: 115 grams

The **GiantMouse ACE Nimbus** is a cool and solid work horse, designed by Jens Ansø and Jesper Voxnaes. The Nimbus got its name from the Nimbus motorcycle. A design that was produced in between 1919 and 1960. Another true work horse, designed to never give up. That is exactly also what the GiantMouse ACE Nimbus excels is good at!


The modern, Danish design almost feels futuristic. And yet the blade was inspired by the traditional, Scandinavian Puukko knife. A functional knife that was used for hundreds of years in the high North.


The ACE Nimbus is, in terms of size, a nice mid-size pocket knife. A blade length of 7.7 cm is for practically everybody enough to carry out daily tasks. The G10 handle perfectly fills the hand. Curves in just the right places make this knife an ergonomic masterpiece.


To make sure you don’t have to sharpen this knife that often GiantMouse chose an incredibly good type of steel: Böhler M390, an extremely stainless type of steel from Austria. M390 retains its sharpness well and it is, with the right tools, also relatively easy to sharpen yourself. Opening this blade is easy with the thumb hole. The ball bearings make sure that the knife will open and close smoothly.


## GiantMouse ACE-line


The GiantMouse ACE-line was developed to meet the ever growing demand for GiantMouse knives. After a couple of limited edition knives that were sold out in the blink of an eye the demand continued to grow. Hence the ACE-collection. Designs with the same cool style, with the same premium type of steel, but more accessible to all!



GiantMouse ACE Nimbus Green G10 pocket knife, Ansø en Voxnaes design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

GiantMouse ACE Nimbus Green G10 pocket knife, Ansø en Voxnaes design