Name: KA-BAR 1117 necker
Brand: KA-BAR
SKU: KA1117
Availability: BackOrder
Rating: 8 (1 reviews)

KA-BAR BK11 Becker Necker neck knife

notforsale

not_replaced_in

legal_agecheck_key

Fällkniven F1x Elmax Pilot Knife, outdoor knife

msrp_price

Gerber Ghostrike 30-001005 fixed knife

Fällkniven F1 Pro Elmax, Standard Version, F1PROELMAX outdoor knife

KA-BAR Becker Remora BK13CP neck knife

KA-BAR Becker Skeleton Knife neck knife, BK23BP

KA-BAR Short Becker Drop Point BK16

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Cold Steel Special Forces Shovel 92SF sheath, SC92SF

Fällkniven Leather Sheath for F1, closed

Opinel Les Pyrénées 002567 natural sharpening stone, 2.2 x 10 cm

Skerper Pocket Strop STP002, stropping paddle

White River Knives M1 Caper Black & OD Linen Micarta fixed knife, Kydex sheath

Cold Steel Mini Tac Tanto 49HTF neck knife

Gerber folding spade E-Tool SE

Gränsfors Bruk Natural Whetstone 4035, natural sharpening stone

Gränsfors Bruk Outdoor Axe 425, bushcraft axe

Gränsfors Bruk Scandinavian Forest Axe 430

Cold Steel Pendleton Mini Hunter VG1, 36LPME

Cold Steel Special Forces Shovel - 92SF

Handle/blade: 1095-Cro-Van
Blade length: 9.5 cm
Weight: 66 grams

KA-BAR 1117 necker

brand

blade_finish

knife_edge_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Das Neck Knife hätte 5 Sterne verdient, wenn nur der Griff besser wäre. Man kann es (mit mittelgroßen Händen) nicht richtig fest greifen.
Nicht die Grifflänge, sondern die Griffbreite bzw. -form ist das Problem: zu schmal + gerade. Wenn der Griff die Form des Esee Izuala, Ka-Bar/Becker BK14 oder Tops Tibo hätte, wäre es perfekt.
Umwicklung mit Paracord - am besten doppelt - oder besser gleich mit dickerer 5mm Reepschnur, macht schon einen deutlichen Unterschied, auch wenn man das Problem damit nicht ganz beheben kann. 

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

KA-BAR 1117 necker

KA-BAR 1117 necker

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

KA-BAR 1117 necker

KA-BAR 1117 necker

KA-BAR 1117 necker

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

KA-BAR 1117 necker

Relevant topics