Name: KA-BAR 5106BP-2 necker
Brand: KA-BAR
SKU: KA5106BP-2
Availability: BackOrder
Rating: 8.66667 (3 reviews)

Handle/blade: 5Cr15 stainless steel
Blade length: 5.3 cm
Weight: 36 grams

KA-BAR 5106BP-2 necker

brand

blade_finish

knife_edge_type

knife_bladeshape

sharpening_angle

pocketknife_steel

notforsale

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

videos

when spending at least €125 on KA-BAR fixed knives (1 per order)

Free Skerper Basic sharpening pen worth €14.95

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Fantastic little knife really performs and holds a good edge much better than expected, the sheath design lets it down a little but that said it does the job. Good value for money.

Nekmesje gekocht als eerste zakmes voor mijn dochter (7). Het Kydex foudraal is wat dun uitgemeten (en ook de ridges waarachter het mes vast moet blijven zitten zijn nogal klein) maar het mes zit er wel goed genoeg in om veilig mee te kunnen lopen. Scherpte af-fabriek is niet super, maar voldoende. Voor €16 geen verkeerde koop.

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

KA-BAR 5106BP-2 necker

Free Skerper Basic sharpening pen worth €14.95