Name: Kershaw Fraxion 1160OL pocket knife green, Jens Anso design
Brand: Kershaw
SKU: KE1160OL
Price: 36.95 EUR
Availability: BackOrder

Work Sharp Multi-Sharpener Ken Onion Edition

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

Work Sharp Ken Onion Edition Knife & Tool Sharpener Mk.2 WSKTS-KO2, electric knife sharpener

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Kershaw knife stand for 3 knives

Ballistol maintenance oil, 50 ml

Handle/blade: G10/carbon fibre/8Cr13MoV
Blade length: 7.3 cm 
Weight: 55 grams


The **Kershaw Fraxion** is a light-weight pocket knife, designed by Jens Ansø. This Danish master designer turned the Fraxion into a modern winner. The handle is made from a laminate with G10 and carbon fibre. The top layer of this *twill-woven*carbon fibre, secured on a layer of G10. The whole was enhanced with a small steel liner to take care of the lock.




The 8Cr13MoV steel blade is enhanced with a nice hollow grind. KVT ball bearings were places around the pivot. These guarantee that the knife moves smoothly and opens quickly with the help of the flipper. Because of the materials used and the construction the Fraxion only weighs a fraction of a comparable knife this size: only 55 grams. With the Fraxion Ansø once again demonstrates that he is one of the best pocket knife designers in the world today.




Kershaw Fraxion 1160OL pocket knife green, Jens Anso design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Kershaw Fraxion 1160OL pocket knife green, Jens Anso design

Kershaw Fraxion 1160OL pocket knife green, Jens Anso design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Kershaw Fraxion 1160OL pocket knife green, Jens Anso design

Kershaw Fraxion 1160OL pocket knife green, Jens Anso design

Kershaw Fraxion 1160OL pocket knife green, Jens Anso design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Kershaw Fraxion 1160OL pocket knife green, Jens Anso design

Relevant topics