Name: Leatherman Skeletool Coyote multitool, in gift box
Brand: Leatherman
SKU: LE832213
Availability: OutOfStock

Multitool with 7 functions
Weight: 150 grams


Ready to elevate your gear with the perfect Leatherman tool, but not sure which one to choose?

Leatherman multitools

The **Leatherman Skeletool** is an incredibly cool multi-tool. Made to be as light as possible, while it has been enhanced with almost all tools you could possibly need on a daily basis.


From the outside you can easily open the pocket knife with one hand. When opened a linerlock will firmly keep the blade in place. As a result it will never close when you don’t want it to. The frame on the Skeletool has been enhanced with round cut-outs in various places. As a result the knife is very light. This special edition has been given a coyote-tan-coloured finish, combined with black and silver. Very classy.


At the end of the tool you will find a bit holder. Standardly the Leatherman Skeletool comes with a No.1 and No.2 Philips head bit. On the side of the frame you will find a 1/4“ and 3/6“ flathead screwdriver. As a result you will immediately have a couple of fitting screwdrivers at hand that will enable you to carry out a lot of daily tasks. Good to know is that the bit holder has a clamp with a spring that helps keep the bit in place. So you have to press this clamp down to change the bit. The standard Leatherman bits (from, amongst others, the bit kit) easily fit inside.


## Leatherman Skeletool tools




* Needle nose pliers

* Pliers

* Hard wire cutters

* Wire cutters

* Knife (partially serrated)

* Snap hook with bottle opener

* Bit holder with bits



This Leatherman Skeletool comes in a beautiful gift box.



Leatherman Skeletool Coyote multitool, in gift box

brand

colour

zm_series

blade_finish

handle_material

knife_edge_type

multitool_tools

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_width

value_height

value_weight

value_blade_height

value_blade_length

value_blade_thickness

not_replaced_in

legal_agecheck_key

when spending at least €125 on a Leatherman multi-tool (1 per order)

Free Knivesandtools #EveryDayCloth

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

value_multitool_blade

value_multitool_cm_pliers

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Leatherman Skeletool Coyote multitool, in gift box

Free Knivesandtools #EveryDayCloth

Leatherman Skeletool Coyote multitool, in gift box

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Leatherman Skeletool Coyote multitool, in gift box

Leatherman Skeletool Coyote multitool, in gift box

Free Knivesandtools #EveryDayCloth

Leatherman Skeletool Coyote multitool, in gift box

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Leatherman Skeletool Coyote multitool, in gift box

Relevant topics