Name: Medford Eris, PVD D2, pocket knife, Greg Medford design
Brand: Medford
SKU: MFMK037DTQ-30PV-SSCS
Availability: BackOrder

Mcusta MC-0202G Shinra Maxima Takeri gentleman's knife

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Kershaw Tilt 50th Anniversary Model 7424 Limited Edition, pocket knife

strike_price

Handle/blade: titanium/D2
Blade length: 5.1 cm
Weight: 95 grams

The **Medford Eris** is magnificent as a small knife. Within the Medford Knife and Tool range this is truly a teeny tiny knife. And yet the construction of this pocket knife is just as good as that of its big brothers. At the thickest part of the handle (including pocket clip) the Eris is 18 mm thick. That is quite a lot for a knife this size. The blade thickness of 4.8 mm is also impressive.

 The Eris has a frame made from titanium. This version has a stonewashed finish. The blade has a hollow grind that was applied by hand and is enhanced with a PVD-coating.

 D2 is a tool steel that will always require maintenance and oil. Some budget knives use D2 as a cheap option with a rudimentary heat treatment. Medford, however, does whatever it can to turn D2 into an amazing type of steel with excellent qualities. So definitely not a budget option!

 Each Medford knife is made by hand by talented knife makers. Individual differences therefore occur and make each knife unique. It takes approximately one year for Medford to ship their knives. Knives that are available on our website are in stock and can immediately be shipped. However, be there in time: it might take a while for the new stock to arrive!



Medford Eris, PVD D2, pocket knife, Greg Medford design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Medford Eris, PVD D2, pocket knife, Greg Medford design

Medford Eris, PVD D2, pocket knife, Greg Medford design

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Medford Eris, PVD D2, pocket knife, Greg Medford design

Medford Eris, PVD D2, pocket knife, Greg Medford design

Medford Eris, PVD D2, pocket knife, Greg Medford design

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Medford Eris, PVD D2, pocket knife, Greg Medford design

Relevant topics