Name: Medford Infraction, PVD S35VN, PVD Handle pocket knife, Greg Medford design
Brand: Medford
SKU: MF-21-IN-01
Price: 649.95 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Work Sharp Multi-Sharpener Ken Onion Edition

Spyderco Sharpmaker, 204MF

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

UltiClip UltiLink Complete Kit, mounting set for sheaths

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

UltiClip XL clip for sheaths

Böker Plus Kydex Belt Clip Large 09BO555 belt clip

Fallkniven Diamond Ceramic Whetstone DC4

UltiClip Slim 2.2 clip for sheaths

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Handle/blade: titanium/CPM S35VN
Blade length: 9.2 cm 
Weight: 165 grams

The **Medford Infraction** is a cool and popular pocket knife, designed by Greg Medford. Striking about the Infraction is the remarkable blade. Like other Medford knives, the Infraction knife has a hollow grind that is applied by hand. However, the remarkable combination of the finger groove and the thumb hole make this blade unique.

The handle on the Infraction is made from titanium. It features a beautiful pattern, named 'Galaxy' by Medford.

The blade is made from CPM S45VN. The hollow grind on the blade was applied by hand. This is a unique feature: only few producers apply a hollow grind by hand. With the thumb slot you can easily open the blade. At first this might take some getting used to. When opened, a solid framelock keeps the blade in place. Medford pressed the stop-pin in the blade. As a result, it rests nice and symmetrically against the handle. This adds strength.

Each Medford knife is made by hand by talented knife makers. Individual differences therefore occur and make each knife unique. It takes approximately one year for Medford to ship their knives. Knives that are available on our website are in stock and can immediately be shipped. So make sure you don't miss out: it might take a while for new stock to arrive!


Medford Infraction, PVD S35VN, PVD Handle pocket knife, Greg Medford design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Medford Infraction, PVD S35VN, PVD Handle pocket knife, Greg Medford design

Medford Infraction, PVD S35VN, PVD Handle pocket knife, Greg Medford design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Medford Infraction, PVD S35VN, PVD Handle pocket knife, Greg Medford design

Medford Infraction, PVD S35VN, PVD Handle pocket knife, Greg Medford design

Medford Infraction, PVD S35VN, PVD Handle pocket knife, Greg Medford design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Medford Infraction, PVD S35VN, PVD Handle pocket knife, Greg Medford design

Relevant topics