Name: Medford Micro Praetorian T S35VN, Black PVD Drop Point, Tumbled Art Nouveau Handle, PVD Hardware pocket knife
Brand: Medford
SKU: MF-22-MT-02
Price: 839 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Spyderco Sharpmaker, 204MF

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

UltiClip UltiLink Complete Kit, mounting set for sheaths

Nano-Oil 10w maintenance oil 8cc/8ml

Blade-Tech Tek-Lok (large) universal belt loop mounting system

UltiClip XL clip for sheaths

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

UltiClip Slim 2.2 clip for sheaths

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

The **Medford Micro Praetorian** is the slightly smaller version of the most famous Medford Knives knife. Stubby, robust and extremely solid: the Micro Praetorian is it all. 100% made in the United States, from American materials, by a veteran-run company. 

The Medford Micro Praetorian might look 'micro', but it is still a large knife! The CPM S35VN steel blade has a hand-sharpened hollow grind. This is a unique feature: hardly any producers apply grinds by hand. The blade is easy to open with the generous thumb slot. This might take some getting used to at first. When opened, a solid frame lock keeps the blade in place. Medford has pressed the stop-pin into the blade. As a result, it rests nice and symmetrically against the handle. This also adds strength.

CPM S35VN is a premium stainless steel. It has been one of the most popular types of steel on the market for many years. For a stainless steel, it is fairly tough and relatively easy to sharpen.

This version has a gold-coloured 'Art Nouveau' finish. It is very cool and entirely unique. The blade has a black PVD coating. The pocket clip and backspacer also have this coating.

Each Medford knife is handmade by talented knife makers. Therefore, individual variations will occur, making each knife unique. It takes approximately one year for Medford to ship their knives. Knives that are listed as in stock on our website are available and can be shipped immediately. So make sure you don't miss out: it might take a while for new stock to arrive!

Medford Micro Praetorian T S35VN, Black PVD Drop Point, Tumbled Art Nouveau Handle, PVD Hardware pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

legal_agecheck_key

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Medford Micro Praetorian T S35VN, Black PVD Drop Point, Tumbled Art Nouveau Handle, PVD Hardware pocket knife

Medford Micro Praetorian T S35VN, Black PVD Drop Point, Tumbled Art Nouveau Handle, PVD Hardware pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Medford Micro Praetorian T S35VN, Black PVD Drop Point, Tumbled Art Nouveau Handle, PVD Hardware pocket knife

Medford Micro Praetorian T S35VN, Black PVD Drop Point, Tumbled Art Nouveau Handle, PVD Hardware pocket knife

Medford Micro Praetorian T S35VN, Black PVD Drop Point, Tumbled Art Nouveau Handle, PVD Hardware pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Medford Micro Praetorian T S35VN, Black PVD Drop Point, Tumbled Art Nouveau Handle, PVD Hardware pocket knife

Relevant topics