Name: Medford Midi Marauder Blue Anodised Handle, Cherry Blossom, Satin S35VN Satin pocket knife
Brand: Medford
SKU: MF-20-MM-01
Availability: BackOrder

Handle/blade: titanium/CPM S35VN
Blade length: 9.2 cm 
Weight: 180 grams

The **Medford Midi Marauder** is a cool and robust pocket knife with a look and feel completely its own. Striking is the thickness of the blade in combination with the thickness of the handle. They both have the same thickness. As such the Slim Midi Marauder looks incredibly decent. Unique about this Midi Marauder is the fact that the handle is enhanced with a blue anodized finish, with a Cherry Blossom engraving. Fancy for such a beast.

 The blade is made from CPM S35VN steel. The hollow grind on the blade was applied by hand. This is a unique feature: only a rare few producers apply a hollow grind by hand. With the thumb slot you can easily open the blade. At first this might take some getting used to. When opened a solid framelock keeps the blade in place. Medford pressed the stop-pin in the blade. As a result it symmetrically leans against the handle. This adds strength.

 CPM S35VN is a premium, stainless type of steel. For years this has been one of the most popular types of steel on the market. It is, for stainless steel, rather tough and relatively easy to sharpen.

 Each Medford knife is made by hand by talented knife makers. Individual differences therefore occur and make each knife unique. All blades are given a hollow grind that is applied by hand. It takes approximately one year for Medford to ship their knives. Knives that are available on our website are in stock and can immediately be shipped. However, be there in time: it might take a while for the new stock to arrive!

 

Medford Midi Marauder Blue Anodised Handle, Cherry Blossom, Satin S35VN Satin pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Medford Midi Marauder Blue Anodised Handle, Cherry Blossom, Satin S35VN Satin pocket knife