Name: Medford Thorn S35VN OD Green G10 neck knife
Brand: Medford
SKU: MF-21-TO-03
Price: 209 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knivesandtools EDC pouch

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

Spyderco Sharpmaker, 204MF

productlabel

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

UltiClip UltiLink Complete Kit, mounting set for sheaths

Blade-Tech Tek-Lok (large) universal belt loop mounting system

UltiClip XL clip for sheaths

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

UltiClip Slim 2.2 clip for sheaths

Fallkniven Diamond Ceramic Whetstone DC4

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Ballistol maintenance oil spray, 200 ml

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

The **Medford Thorn** is a strong, compact neck knife. A Wharncliffe blade with a pointed tip and a blade thickness of over 5 mm. Solid and simple. But also very good.

The blade is made from CPM S35VN steel. The blade has a hand-sharpened flat grind. This is a unique feature: hardly any producers apply grinds by hand. 

The Medford Thorn comes with a kydex sheath with a paracord neck cord.

Each Medford knife is made by hand by talented knife makers. Therefore, individual variations occur, making each knife unique. Knives that are listed as in stock on our website are available and can be shipped immediately. So make sure you don't miss out: it might take a while for new stock to arrive!

Medford Thorn S35VN OD Green G10 neck knife

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

legal_agecheck_key

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Medford Thorn S35VN OD Green G10 neck knife

Medford Thorn S35VN OD Green G10 neck knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Medford Thorn S35VN OD Green G10 neck knife

Medford Thorn S35VN OD Green G10 neck knife

Medford Thorn S35VN OD Green G10 neck knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Medford Thorn S35VN OD Green G10 neck knife

Relevant topics