Name: Real Steel Crusader 3701 Black 7441 pocket knife, Poltergeist design
Brand: Real Steel Knives
SKU: RL7441
Price: 40 EUR
Availability: BackOrder

Spyderco Tenacious C122GS serrated pocket knife

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

Real Steel Pilgrim 22 Black RS041 knife bag

Work Sharp Precision Adjust Elite WS09DX066 sharpening system

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Skerper Pocket Strop STP002, stropping paddle

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #OneKnifeStand, knife stand

Handle/blade: G10 and stainless steel/14C28N
Blade length: 9.5 cm
Weight: 150 grams

The **Real Steel Crusader 3701** is a large and solid pocket knife, designed by Jakub Wieczorkiewicz from Poltergeist Works. He is known for his modern and tough designs. Striking is the use of only two screws for the construction of the Crusader. The two large screws enable you to look through the frame. A fun little detail on this practical pocket knife.

 A G10 thumb stud ensures that you can easily open it with one hand. When opened the steel framelock ensures that the blade won't move. The shape of the blade is very practical. There is a piece of jimping on the back of the blade on which your thumb will naturally find its place. As such you will have a lot of control over the knife when you use it. In terms of steel Sandvik 14C28N was chosen. A stainless type of steel that retains its sharpness well and is also easy to sharpen.

 ## Real Steel Knives: impressive knives for amazing prices

 In terms of price-quality ratio Real Steel is an outstanding company. You rarely get so much knife for such a great price. Real Steel Knives uses decent materials and its years and years of experience in the pocket knife world to produce knives you will really need. Reliable, properly finished and for an amazing price. You couldn't possibly ask for more.



Real Steel Crusader 3701 Black 7441 pocket knife, Poltergeist design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

when spending at least  €100 on Real Steel knives (1 per order)

Free Real Steel 6-in-1 FTP Tool screwdriver

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Real Steel Crusader 3701 Black 7441 pocket knife, Poltergeist design

Free Real Steel 6-in-1 FTP Tool screwdriver

Real Steel Crusader 3701 Black 7441 pocket knife, Poltergeist design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Real Steel Crusader 3701 Black 7441 pocket knife, Poltergeist design

Real Steel Crusader 3701 Black 7441 pocket knife, Poltergeist design

Free Real Steel 6-in-1 FTP Tool screwdriver

Real Steel Crusader 3701 Black 7441 pocket knife, Poltergeist design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Real Steel Crusader 3701 Black 7441 pocket knife, Poltergeist design

Relevant topics