Agawa spare pins and c-clips

notforsale

not_replaced_in

msrp_price

Akinod Multifunctional Cutlery 13H25 Downtown Black, outdoor cutlery

legal_agecheck_key

Amefa Baguette 8440 six pastry forks

Amefa Oxford 1860 24-piece cutlery set

ANV M311 Spelter N690, Black Handle, M311-N690-028, Black Kydex Sheath, survival knife

Ardennes Coticule 707 Belgian Blue Whetstone for pruners, 100 x 30 mm

Ardennes Coticule 712 BBW, Belgian Blue sharpening steel, 20 cm

Ardennes Coticule Selected 100 x 40 mm

Armatus Carry Architect sheath for the Benchmade 200 Puukko, multicam

Armatus Carry Architect sheath for the ESEE CR2.5, multicam

Armatus Carry Architect sheath for the ESEE Izula/Izula II, gunmetal grey

Armatus Carry Architect sheath for the Fällkniven F1x, black

Autine Trail Boss, hand forged axe

Autine Varidots, hand forged axe

Ballistol maintenance cloths, 10 pcs

productlabel

strike_price

Skerper paddle strop Viking, rough, stropping paddle

Knives and Tools Knife Cleaning Mat, rubber

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Fallkniven Diamond Ceramic Whetstone DC4

Ballistol maintenance oil, 50 ml

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

The **SOG Baton Q3** is a revolutionary multi-tool. It turns the conventional idea of folding pliers or a Swiss pocket knife with several tools completely upside down. SOG went back to the drawing board and started from scratch. Only looking at: who does someone need? How is it most comfortable to carry? Which tools do you often need together? The result is an unconventional multi-tool that can come in handy in many different ways. A tool to be used in and around the house, on the road or in the office.


 The SOG Baton Q3 has thirteen different tools. Too many to describe all in detail, but we take a look at the most important tools


The SOG Baton Q3 has pliers in the middle You pull the 'pen' apart and spring-loaded pliers will pop up. The pliers are comprised of roughly three parts: needle nose pliers, regular pliers and wire cutters. Various other tools are accessible from the outside. A knife, screwdrivers, bottle opener, can opener, file and some other useful tools.



Thanks to its size you carry it like an ordinary, slightly larger pen. On the side you can find another pocket clip which ensures that you will never lose it. The SOG Baton Q3 is certainly not the most conventional tool on the market but a very practical addition to your EDC- rotation.



 **Tools in this multi-tool:**  



* Awl

* Knife

* Pliers

* Bottle opener

* Can opener

* Chisel

* File

* Medium screwdriver

* Small screwdriver

* Spectacle screwdriver

* Philips head screwdriver

* Needle nose pliers

* Wire cutters for softer wires







SOG Baton Q3 multitool ID1021-CP

brand

colour

zm_series

blade_finish

handle_material

knife_edge_type

multitool_tools

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_width

value_height

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

videos

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

de multitool voelt kwalitatief heel stevig aan en alle functies werken prima 
ook als je met 1 van de schroeven draaiers wat kracht moet zetten verdraait of vervormt er niks 
het eruit peuteren van de schroevendraaiers is niet heel makkelijk 

1 heel groot minpunt is dat de handvatten van de tang bij gebruik gaan schuiven en zodra die iets inschuiven sluit de tang niet meer dus als je bv iets ergens tussen uit wil trekken en je duwt tegen een randje schuiven de handvatten in en kun je de tang niet meer dicht knijpen

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

value_multitool_blade

value_multitool_cm_pliers

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

SOG Baton Q3 multitool ID1021-CP

SOG Baton Q3 multitool ID1021-CP

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

SOG Baton Q3 multitool ID1021-CP

SOG Baton Q3 multitool ID1021-CP

SOG Baton Q3 multitool ID1021-CP

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

SOG Baton Q3 multitool ID1021-CP

Relevant topics