Grailer 4 Carbon Fiber pocket knife, Michel Timmermans design

productlabel

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Fällkniven PXLey Elforyn Super Tusk, Elmax pocket knife

Benchmade 940-2 Osborne design pocket knife

Maserin Police 680/G10V Green G10 pocket knife

strike_price

Fallkniven PXLx pocket knife

Fallkniven U2 Folder

Spyderco Stretch 2 Blue K390 C90FP2K390 pocket knife

Benchmade 940-1 Osborne

Benchmade 940BK-03 Osborne, DLC Battlewash CPM MagnaCut, Burnt Copper Aluminum pocket knife, Warren Osborne design

Benchmade 940BK Osborne

Böker Plus Kaizen Black 01BO390 pocket knife

Spyderco Paramilitary 2 CPM SPY27 C81GPCBL2 Blue G10 pocket knife

Spyderco C81MPCW2 Paramilitary 2 Brown Canvas Micarta CruWear pocket knife

CRKT Redemption K560KXP, pocket knife, Ken Onion design

Spyderco Military 2 CPM Cru-Wear C36MPCW2 Brown Canvas Micarta pocket knife

Cold Steel AD-10 Black 28DDBKBK pocket knife, Andrew Demko design

Real Steel Relict 9451 pocket knife, Braginets design

Fällkniven PCx P Concept pocket knife

Hogue X1 Microflip Black Wharncliffe pocket knife 24160, Allen Elishewitz design

Handle/blade: FRN/VG10
Blade length: 8.9 cm
Weight: 145 grams

The **SOG Vulcan Tanto** is a practical and tough pocket knife. Comfortable in hand, practical in use. The blade is razor-sharp and with a thickness of 3.9 mm thick enough for heavy-duty work.

 The construction of the blade is remarkable. The core is made from VG10-steel. On both sides this is laminated with softer steel. As such you have a hard core that retains its sharpness well, flanked by softer steel for solidity.

 ## SOG Vulcan pocket knife

 You open the SOG Vulcan with the double-sided thumb stud or flipper. The ARC-lock takes care of the lock. Easy to control and very safe. The Vulcan is enhanced with a deep-carry pocket clip. As such you can discretely carry this knife with you. And yet, because of its tough looks it is still a knife that should be admired.



SOG Vulcan Tanto San Mai VL-03 pocket knife

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

SOG Vulcan Tanto San Mai VL-03 pocket knife

SOG Vulcan Tanto San Mai VL-03 pocket knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

SOG Vulcan Tanto San Mai VL-03 pocket knife

SOG Vulcan Tanto San Mai VL-03 pocket knife

SOG Vulcan Tanto San Mai VL-03 pocket knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

SOG Vulcan Tanto San Mai VL-03 pocket knife

Relevant topics