Name: TSPROF Venev S TS-SH2001110 double-sided diamond-coated sharpening stone 7/5-3/2 OSB
Brand: TSProf
SKU: TSSH2001110
Price: 42 EUR
Availability: BackOrder

TSPROF Boride CS-HD TSSH2101370 5-piece sharpening stone set

notforsale

not_replaced_in

Skerper paddle strop Viking, rough, stropping paddle

TSPROF Abrasive Holder with Axicube-I PT2100300 sharpening stone holder with digital angle meter

TSPROF Whole Milled Fillet Clamps TS-PT2000172

TSPROF chisel and scissors adapter

TSPROF Double Fillet Clamp PT1900060 clamps

Skerper Paddle Strop STP001, stropping paddle

Skerper Arkansas Pocket Stone NAPO40, Translucent Arkansas

Skerper Basic ceramic sharpening steel, 24.5 cm, SH003

TSPROF Blitz Kadet TS-SH2000740 set diamond-coated sharpening stones 5-piece

productlabel

TSPROF Hex Screwdriver Kit MS1800135 Allen key set 5-piece

TSPROF Single Fillet Clamp, PT1800020

Skerper Basic diamond sharpening steel 30 cm, SH005

Skerper Pocket Strop STP002, stropping paddle

TSPROF Blitz TS-BS19006U stops for sharpening stone holder

TSPROF K03 L-adapter PT2200380 clamp adapter

TSPROF 50x-500x microscope with LED light

TSPROF Venev S TS-SH2001090 double-sided diamond-coated sharpening stone 50/40-20/14

TSPROF Venev Double Sided Diamond Stone TSSH2201500 double-sided diamond sharpening stone, 10/7-5/3

TSPROF Blitz L-adapter PT2200420 clamp adapter

The **TSPROF Venev S 7/5-3/2** is a small, double-sided diamond-coated sharpening stone that is perfect for the TSPROF Kadet and Blitz sharpening system. The 20/14 side has an improved organic OSB binding. This is a modernised binding, which is not based on a sharpening powder, but on a micro-powder of the ACM brand, made of synthetic diamonds. The difference between the OSB binding and others is that no boron carbide is being used. Moreover, the layer is not sintered, but glued to the surface of the metal plate. An OSB binding is perfect for harder types of steel and when sharpening at small sharpening angles.

## Russian microns

No grain on a sharpening stone has the same size. A sharpening stone is comprised of millions of sharpening particles. In the real world these sharpening particles never have the same size. Even if the manufacturer carefully sorts them by size, there will always be a certain range of dimensions. That is why Venev states that this sharpening stone has an average grain size of 7 to 5 and from 3 to 2 micron. In simple terms: this sharpening stone can be compared to a J2000 and J5000 grit Japanese sharpening stone.

## Use and maintenance

The sharpening stones work best if you add some water to the surface. You don't need sharpening oil. As you use them the sharpening stones can be contaminated with metal particles. Fortunately you can easily remove those with hot water and a sponge. These sharpening stones are extremely hard. You don't need to lap them.

## Venev Industrial Diamonds

Venev has been the largest producer of synthetic diamonds and diamond-coated sharpening stones in Russia for over 30 years. Their monocrystalline diamonds have come to the attention of fanatical knife sharpeners for their price-quality ratio and sustainability. Ever since the Venev sharpening product are sold worldwide.

TSPROF Venev S TS-SH2001110 double-sided diamond-coated sharpening stone 7/5-3/2 OSB

brand

colour

material

grit_micron

grit_size_kato

stone_abrasive

value_number

value_width

value_height

value_length

value_weight

expectedRestockDate

series

msrp_price

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

article_number_site

General information

value_height_usable_part

The height/thickness of a sharpening stone (excluding a potential base).

Height usable part

value_length_useful_part

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

value_width_useful_part

Dimensions & weight

The material that gives the sharpening stone its abrasive effect. Diamond, ceramics (e.g. aluminium oxide or silicon carbide) or the materials in a natural stone. Read [more about the advantages and disadvantages of these materials](/en/ct/sharpening-stone-materials-which-are-the-best.htm).

Abrasive

Material

sharpsys_type

The grain size we give to a sharpening stone. We test all sharpening stones ourselves and add an appropriate grain size on the basis of this test. From extra coarse to ultra fine.

TSPROF Venev S TS-SH2001110 double-sided diamond-coated sharpening stone 7/5-3/2 OSB

TSPROF Venev S TS-SH2001110 double-sided diamond-coated sharpening stone 7/5-3/2 OSB

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

TSPROF Venev S TS-SH2001110 double-sided diamond-coated sharpening stone 7/5-3/2 OSB

TSPROF Venev S TS-SH2001110 double-sided diamond-coated sharpening stone 7/5-3/2 OSB

TSPROF Venev S TS-SH2001110 double-sided diamond-coated sharpening stone 7/5-3/2 OSB

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

TSPROF Venev S TS-SH2001110 double-sided diamond-coated sharpening stone 7/5-3/2 OSB

Relevant topics