Name: WE Knife Syncro 909A Green Ti pocket knife
Brand: WE Knife
SKU: WK909A
Price: 383.63 EUR
Availability: BackOrder

WE Knife Syncro 909D Flamed Ti pocket knife

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

WE Knife Syncro 909C Grey Ti pocket knife

WE Knife 705E pocket knife, black handle, wharncliffe blade

Kizer Quell Ki4530 pocket knife, Kelvin Kelemen design

Real Steel G-Frame 7874 pocket knife, Ostap Hel design

WE Knife Upshot 2102B Black, Black Blade, Limited Edition pocket knife

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

Knives and Tools Knife Cleaning Mat, rubber

productlabel

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Work Sharp Multi-Sharpener Ken Onion Edition

WE Knife Baculus, TP-07B tactical pen

WE Knife Baculus, TP-07A tactical pen

Skerper paddle strop Viking, rough, stropping paddle

Spyderco Sharpmaker, 204MF

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Civivi C20048-1 Key Bit Container Grey Titanium

Civivi C20048-3 Key Bit Container Blue Titanium

Civivi C20048-2 Key Bit Container Bronze Titanium

WE Knife Syrinx TP-04C EDC pen, Black

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 paracord type III Military Spec , colour: Camo Green, 100 ft (30.48 m)

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Handle/blade: titanium/CPM S35VN
Blade length: 9.8 cm
Weight: 125 grams

The **WE Knife Syncro 909** is a long and slim EDC pocket knife, with a handle made from one piece of titanium. It is also called an 'integral frame'. Extremely difficult to produce well, but it does have a couple of important advantages. The design of the knife is namely not disrupted by screws, and the construction is incredibly solid.

 The blade is made from CPM S35VN-steel. An incredibly popular American type of steel. Retains its sharpness well, is stainless and easy to sharpen. Because of the ball bearings around the pivot it moves well. As such the flipper makes it shoot from the handle like a canon. When opened the blade is blocked by a solid framelock. It offers a solid lock, and because of the steel insert in the lockbar the lock will function for years to come.

WE Knife Syncro 909A Green Ti pocket knife

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife Syncro 909A Green Ti pocket knife

WE Knife Syncro 909A Green Ti pocket knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife Syncro 909A Green Ti pocket knife

WE Knife Syncro 909A Green Ti pocket knife

WE Knife Syncro 909A Green Ti pocket knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife Syncro 909A Green Ti pocket knife

Relevant topics