The **Fox Knives Anzu ALOR** was inspired by the Mesopotamian creature Anzu, who challenged the power of the gods by stealing the 'Table of Destinies'. Designed by Les George, this cool knife, like Anzu, exudes strength and determination. The ergonomic handle ensures a good grip, while the CPM MagnaCut steel offers maximum cutting capabilities. The Anzu is equipped with the VERSO locking mechanism and dual thumb studs that allow you to open the knife quickly and with ease.

## CPM MagnaCut blade

The blade of the Fox Anzu is made from CPM MagnaCut. Many feel this type of steel is 'perfect'. Quite the statement. We think they have a point. It is a stainless type of tool steel. With a comparable toughness and sharpness retention of carbon steels such as CPM-CruWear, CPM-4V and Vanadis 4. The corrosion resistance is also sublime. Better than the popular stainless types of steel such as CPM S110V, CPM S45VN and Böhler M390. This version of the Anzu features a matte-black PVD coating.

## Aluminium handle

The handle is made from aluminium, a lightweight yet sturdy material. The handle features a geometric pattern that not only looks cool, it also provides a good grip.

## About Fox Knives

From the Italian knife capital Maniago, Fox has been providing the world with excellent knives since 1977. What's special about this brand is that they cover the entire knife market: from budget knives to the cream of the crop, Fox does it all. Fox Knives has won many prizes on international knife events. Both with their own designs and in collaboration with other designers. In terms of quality, Fox is definitely one of the best manufacturers in the world. Fox is known for their excellent price-quality ratio and pursuit of innovation and improvement.

Fox Anzu FX-560 ALOR, CPM MagnaCut, Blue Aluminium, pocket knife

colour

Fox Knives Anzu FX-560-ALBR CPM MagnaCut Black PVD, Aluminium Bronze pocket knife, Les George design

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

value_weight

value_blade_length

value_opened_length

value_blade_thickness

knife_sheath

Fox Anzu FX-560 CFOR Magnacut, 3k Carbon Fiber, pocket knife, Les George design

value_blade_height

Fox Anzu FX-560 G10B Magnacut, Black G10, pocket knife, Les George design

sharpening_angle

brand

zm_series

legal_agecheck_key

notforsale

not_replaced_in

expectedRestockDate

videos

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Fox Anzu FX-560 ALOR, CPM MagnaCut, Blue Aluminium, pocket knife